§ 63-8. Process for approval.

The following process will be use for approval of new addresses, as applicable:

(1)

The applicant shall submit proposed road names to the planning department;

(2)

The applicant shall receive notice from the planning department as to approved road names;

(3)

The applicant shall submit a plat with the approved road names listed to the planning department;

(4)

The planning department shall review and approve the plat for conformance with all federal, state, and local codes;

(5)

The applicant shall record the final approved plat showing approved road names with the clerk of circuit court;

(6)

The applicant shall submit a scaled drawing of the property where he/she wishes to build, enlarge, or renovate a structure at the time of building permit, septic tank permit and/or well permit application. The site plan shall include the following information as determined to be necessary for address approval, in addition to all other federal, state, and local requirements:

a.

The site plan shall be drawn to scale.

b.

The plan shall show the complete outline of each proposed building at the location it is proposed to be built. The plan shall also show the actual size of the building to be erected.

c.

The plan shall also show all existing structures located on the property and their exact dimensions.

d.

The plan shall show all property lines. The plans shall also show the actual dimensions of the lot to be built upon.

e.

The plan shall show all required property set back lines.

f.

The plan shall show the exact location of all easements on the property.

g.

The plan shall show all parking and driveways that access the property.

h.

The plan shall show all other structures on adjacent lots within ten feet of the appropriate property line.

(7)

The Geographic Information Systems (GIS) Office shall assign the official address to each structure.

(Ord. No. O-07-09, 11-7-2007)

(Ord. No. O-07-09, 11-7-2007)